The range Multisolvent, employs the BAT (Best Available Technology) as far as cleaning and drying technology is concerned. The cycle takes place entirely under vacuum with values of up to 1 mbar.
The Multisolvent shows a reduced footprint and its solvent consumption is among the lowest in the category (<2 g / cycle). Its simplicity of use and of easy maintenance available to everyone, makes the pair with its highest cleaning performance in an industrial operation (up to h 16 hours of continuous work).
Working capacity, up to 6 cycles / h if coupled with automatic loading and unloading system.
The Multisolvent finds wide application in the following fields:
Machined Mechanical precision parts
– Stamped Details
– Forged components
– Mechanical / Hydraulic components
– Valves / Fittings / Gears
– Special Components
|Cycle completely under deep vacuum|
|Washing chamber – tanks – distiller – separators – condensers – pipe-work all made of stainless steel.|
|Roatry vane Vacuum pump provided with condensation device.|
|Lid/closure of the basket:
it closes the lid of the basket in order to prevent the fall of the parts during the rotation. Available manual lever or independent automatic versions in case of using automatic loading systems (listed options).
|2 solvent storage tanks|
|System with oil protection immersion or sprinkling (optional)|
|Condensation system at – 30 ° C with scroll fridge compressor|
|Electric Steam generator built with high energy savings|
|High efficiency Distillation Unit; available on request systems automatic or manual scraping the bottom of the distillation chamber|
|Primary filtration swarf-filter with auto drying controlled by PLC;
on request it can be installed the system CADS (Chips Automatic Drying System) that can collect and dry up to 30 kg. of machined chip with drying of the same is handled by the PLC. Working with program end (option).
|Device for ultra filtration:
consisting of 1 or more bag filters, drying PLC controlled – On request more cartridge or bag fine filters can be installed (cleaning & drying functions managed by the PLC)
|Service program to start and finish service operations|
|PLC Siemens S7 / 300 control panel with TP700 touch screen; the device is available on request remote assistance (option).|
|Cleaning booster Device with ultrasonic transducers, 1 or 2 rods (option).|
|Cooling system with air-air remote exchangers to eliminate the requirements of water for the cooling and condensing (option).|
|Volume (l.)||Basket-holder size
|Type of operation|
|Multisolvent 100||50||35||300 x 450 x h300||Full vacuum|
|Multisolvent 200||100||70||300 x 900 x h300||Full vacuum|
|Multisolvent 300||150||100||450 x 900 x h300||Full vacuum|
|Multisolvent 400||200||140||450 x 130 x h300||Full vacuum|
Do you want a quote or more information?
A specialist consultant will welcome your request